Andrew D Charger Chaser Posted May 14 Author Report Share Posted May 14 Ever notice how often the kit vinyl tires come nice and glossy, when the real ones are usually quite the opposite? A good treatment of sandpaper all over helps, then later a scraping of the tread through sand-dirt outside the front door. The wheel hubs are painted, then detailed including a light wash of watercolor sludge with soap to make it stick. Spike and RogerDuke 1 1 Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted May 15 Report Share Posted May 15 If it weren't for that sandpaper it would be impossible to tell that those aren't real tires and rims. As always, thanks for the pictures. Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted July 23 Author Report Share Posted July 23 Gettin' there, folks! First, windscreen had to be made from scratch, since the windscreen frame was significantly widened from the Revell Classic VW kit. Thankfully, it's flat, so, not impossible. Started with the original windscreen, traced it, then added the appropriate fill plug, on paper. Then, cut the new shape from packaging from something-or-other that my lovely wife bought (no idea what, it was in the recycling). Next, the bumpers. Closest option of the 3 kits is the Aoshima, except these represent the slightly later style with embedded lights. Removed the chrome with bleach, grind off the rubber strip (too wide), fill the light slots, add a new rubber strip. Prime, spray black, mask the rubber strip and spray Alclad chrome. RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted July 24 Report Share Posted July 24 (edited) I can't add anymore emoticons today....but IF I could, I'd give you 2!! A heart, because I love this stuff and a thanks, because you make it look so real!! WOW! * Hey Andrew ! I haven't seen you in a while! Good to see you! Don't be a stranger!! Edited July 24 by Hobie Hartkins RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted July 24 Author Report Share Posted July 24 (edited) Hobie, you're too kind, thank you brother! Just had no idea this would take 3 years.... 🤦♂️ Been tough to keep up, there's always PLENTY going on. Besides projects like these, I teach, I'm a musician, I'm a speaker/presenter, and just finished my first book (about to seek a publisher). No doubt y'all have plenty on your plates as well! Thrilled to see the A-Z game is still going Edited July 24 by Andrew D Charger Chaser RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted July 24 Report Share Posted July 24 , I teach, I'm a musician, I'm a speaker/presenter, and just finished my first book (about to seek a publisher). No doubt y'all have plenty on your plates as well! WOW! What's you're book about? What do you do musically? ( I sing, you see) I've always looked up to you for your ability.....but WOW!! This is amazing! RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted July 24 Author Report Share Posted July 24 Lol well...now I'm feeling selfish for saying...I spent almost 2 decades with the last survivors of the USS Arizona (which is also what I speak and present about). So, I've got stories about them that most folks have never heard, plus my experiences with them. I'm a flutist and composer/arranger. What sorts do you sing, then? RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted July 24 Report Share Posted July 24 I sing a wide range....I've done gospel, country and rock. My fav. is rock though. I have a 3-4 octave range and I'm a trained singer ( diction, breath control, articulation, etc.) RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted July 24 Author Report Share Posted July 24 Man, very impressive range! RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted July 24 Report Share Posted July 24 thanks! Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted July 24 Report Share Posted July 24 5 hours ago, Andrew D Charger Chaser said: Man, very impressive range! I just remembered....low cap G to a high B flat!! Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted July 25 Report Share Posted July 25 (edited) On 7/23/2024 at 8:44 PM, Andrew D Charger Chaser said: Lol well...now I'm feeling selfish for saying...I spent almost 2 decades with the last survivors of the USS Arizona (which is also what I speak and present about). So, I've got stories about them that most folks have never heard, plus my experiences with them. I'm a flutist and composer/arranger. What sorts do you sing, then? Oh my goodness! I can only imagine the stories you have heard. Thank you so much for preserving their legacy. I also dabble in writing. I wrote a romantic fiction 30 years ago. Never tried to get it published but family and friends liked it. I have also worked on and off for 15 years on a book that deals with what moral values might be like on other planets....similiar to C S Lewis's space trilogy. It would be labeled Christian science fiction. Also, have had hundreds of letters to the editor in several newspapers and magazines over 4 decades. The only time I ever got paid was a piece I did for Astronomy magazine.....$200. Didn't even expect money for it! Edited July 25 by RogerDuke Hobie Hartkins 1 Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted August 1 Author Report Share Posted August 1 Impressive Roger, very unique project, I hope it goes as it should! And, your 200 is about 200 more than I've made so far....getting some folks to read mine before I approach a publisher. Blessings on all you're doing! The rest of the glass is from the Aoshima kit; just gotta cut the forward sections off and discard the rest. Once black is applied for the rubber lining, I use BareMetal Foil for the metal bits. Then, all the glass is tinted with a special blend of Clear Floor Polish, food coloring and acrylic thinner. Now, here's how I make headlights. I take the appropriate size acrylic rhinestone/gemstone. Make sure it's acrylic and not glass. Use sandpaper to remove the facets, then "paint" with clear floor polish. Voila. Hobie Hartkins and RogerDuke 2 Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted August 1 Report Share Posted August 1 Always so fun and interesting to watch an artist at work....especially an artist with this much talent and a love of Hazzard County. Quote Link to comment Share on other sites More sharing options...
Hobie Hartkins Posted August 2 Report Share Posted August 2 Andrew......I think you can do about anything with models!! WOW! Roger Christian science fiction. Very interesting.....never heard of this!! RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted August 4 Author Report Share Posted August 4 Y'all are awesome in your kindness of word and deed, thank you! Ok, a little more. Finished the modified/corrected bumpers, plus the re-chromed parts, corrected the taillights from the Cabriolet kit, and started the steer horns. RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
HossC Posted August 4 Report Share Posted August 4 Great stuff, Andrew. It's really starting to come together now. RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted August 5 Report Share Posted August 5 7 hours ago, HossC said: Great stuff, Andrew. It's really starting to come together now. I love it when a plan comes together! ......from a different 80s show....lol Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted August 22 Author Report Share Posted August 22 (edited) Okay, while making the horns, I still had to keep readjusting, as I realized they were a bit too long out to the sides. Finally got the bodywork on it sorted, and painted. I deliberately used brush painting for the central mount, as from the photos it appears to have that "wrapped" look. Had a license plate made by a decal company that does custom work. Turns out they were not waterslide decals, but photo decals in which you use the paper backing. So, I used bare metal foil for the reverse side of the plate, in case anyone was able to glance behind it from one of the corners. Edited August 22 by Andrew D Charger Chaser RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted August 23 Report Share Posted August 23 Looks great! Quote Link to comment Share on other sites More sharing options...
Andrew D Charger Chaser Posted August 23 Author Report Share Posted August 23 Thank you! Only thing left is needing to redo the chrome trim around the windscreen....just came out looking horrible, and it's not easy to redo. I'm relieved at the rest of it, just not ready to let that one area spoil the rest of this. After that, a bit more airbrushing to add some road dust. Started to put on the windshield wipers then realized from my photos of the real thing that the WB crew had removed them. Interesting. RogerDuke 1 Quote Link to comment Share on other sites More sharing options...
RogerDuke Posted August 24 Report Share Posted August 24 It's the attention to the little things like the road dust that always impresses me with your work. But attention to detail is often what separates real artists from amateurs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.