Thanks, for the reply. I don't want to get so anal as to getting the same clamp positions. I do however want to get the following: -Wheel size -Tire Size -Wheel make -Size and color of all decals -Color of base paint(the orange) -Interior color -If it had any options(like if it had any options from the factor, like a floor console which it did have that) -Size of roll cage tubing -The shape of the roll cage(like where the points of contact are at the frame) -Where I can get the push bar on the front or at least the dimensions and what size materials were used so that I can fabricate one -And then just simply anything they might have taken off the car from the factory -Oh yeah, and where the CB was mounted, and where the microphone was mounted for it As far as engine/drivetrain and stuff like that, I'm gonna do my own thing and put in a 440 with a Torqueflite 707 which was the tranny used on the General. Also, I looked at the Buildagenerallee.com's roll bar kit, and I know it's missing at least 1 bar and they still claim it is exact. I don't remember which episode, but one of the episodes in season 1, you can see that there is a bar that goes over the driver's door that branches off of the roll bar that goes over the roof(the one that you see in the car). So this really makes me question how "exact" everything else is that they sell. *Lastly, I noticed you can get the horn from JC Whitney, but it says it's only an 11-note horn where as the General had a 12 note. So what should I do?